TREAD ROLLERS:
1.9" dia. x 16 ga. steel, model 196S.
PRESSURE ROLLERS:
1.9" dia. x 16 ga. steel, model 196S.
BELTING:
6" wide black PVC-120 COS.
CENTER DRIVE:
Reversible drive with 24" integral belt take-up. Specify location.
DRIVE PULLEY:
4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.
END PULLEY:
4" dia., crowned, with
1-3/16" dia. shaft.
RETURN ROLLERS:
1.9" dia. x 16 ga. steel, model 196S, adjustable.
BEARINGS:
All pulley bearings are
precision, heavy duty, lubricated, ball bearing units with cast iron housings.
SPEED:
60 FPM, constant. |
|
BED:
7" x 1-1/2" x 12 ga. channel frame slotted for tread rollers to pop-out. When unit is installed at 7'-0" elevation or higher, rollers must be retained in conveyor
frame. Specify desired elevation. Bed sections attached with couplings and floor supports.
SQUARING RODS:
Adjustable rods on underside of bed allow frame to be squared for improved belt tracking and are standard on all units over 30'.
FLOOR SUPPORTS:
SM-6 adjustable
31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.
MOTOR DRIVE:
1/3 HP, 230/460/3,
60 cycle, ODP right angle gear motor.
ROLLER CHAIN:
Drive pulley is driven
by No. 50 chain for 1-1/2 HP or less
and No. 60 chain on larger drives. Chain take-up provided on motor base.
ELECTRICAL CONTROLS:
Optional |
Price $1.00